INDUSTRIAL LCD DISPLAYS / IGBT MODULES DISTRIBUTOR

Infineon / Mitsubishi / Fuji / Semikron / Eupec / IXYS

Application and Principle of Common Shunt Voltage Reference TL431

Application and Principle of Common Shunt Voltage Reference TL431

Posted Date: 2023-07-25

As a cheap frequent shunt voltage reference, TL431 has a variety of makes use of. Here's a temporary introduction to the frequent and unusual connection strategies of TL431.

As a cheap frequent shunt voltage reference, TL431 has a variety of makes use of. Here's a temporary introduction to the frequent and unusual connection strategies of TL431.

Application and Principle of Common Shunt Voltage Reference TL431

Determine (1) is the everyday connection technique of TL431, which outputs a hard and fast voltage worth. The calculation method is: Vout = (R1+R2)*2.5/R2,

On the identical time, the worth of R3 ought to meet 1mA
When the worth of R1 is 0, R2 might be omitted. Presently, the circuit turns into the type of Determine (2). TL431 is equal to a 2.5V voltage regulator right here.

Utilizing TL431 may also kind an amplitude discriminator, as proven in Determine (3), this circuit is on the enter voltage Vin

Application and Principle of Common Shunt Voltage Reference TL431

The TL431 can be utilized to spice up a near-ground voltage and invert it. As proven in (4), the output calculation method is: Vout = ( (R1+R2)*2.5 – R1*Vin )/R2

Particularly, when R1 = R2, Vout = 5 – Vin. This circuit can be utilized to spice up a voltage near floor to a pre-set vary. It must be famous that the output vary of the TL431 just isn't full scale.

The TL431 itself has a reasonably excessive achieve (I roughly examined it within the simulation, about 46db), so it may be used as an amplifier.

Determine (5) reveals a DC voltage amplifier composed of TL431. The amplification issue of this circuit is decided by R1 and Rin, which is equal to the damaging suggestions loop of the operational amplifier, and its static output voltage is decided by R1 and R2.

The benefit of this circuit is that it's easy in construction, has good accuracy, and may present steady static traits. The draw back is that the enter impedance is small and Vout has a restricted swing.

Application and Principle of Common Shunt Voltage Reference TL431

Determine (6) is an AC amplifier. This construction is similar to a DC amplifier and has the identical benefits and drawbacks. I’m attempting to make use of this amplifier as a substitute of a secondary op amp to amplify the output sign of a pyro IR sensor.

As a cheap frequent shunt voltage reference, TL431 has a variety of makes use of. Here's a temporary introduction to the frequent and unusual connection strategies of TL431.

Application and Principle of Common Shunt Voltage Reference TL431

Determine (1) is the everyday connection technique of TL431, which outputs a hard and fast voltage worth. The calculation method is: Vout = (R1+R2)*2.5/R2,

On the identical time, the worth of R3 ought to meet 1mA
When the worth of R1 is 0, R2 might be omitted. Presently, the circuit turns into the type of Determine (2). TL431 is equal to a 2.5V voltage regulator right here.

Utilizing TL431 may also kind an amplitude discriminator, as proven in Determine (3), this circuit is on the enter voltage Vin

Application and Principle of Common Shunt Voltage Reference TL431

The TL431 can be utilized to spice up a near-ground voltage and invert it. As proven in (4), the output calculation method is: Vout = ( (R1+R2)*2.5 – R1*Vin )/R2

Particularly, when R1 = R2, Vout = 5 – Vin. This circuit can be utilized to spice up a voltage near floor to a pre-set vary. It must be famous that the output vary of the TL431 just isn't full scale.

The TL431 itself has a reasonably excessive achieve (I roughly examined it within the simulation, about 46db), so it may be used as an amplifier.

Determine (5) reveals a DC voltage amplifier composed of TL431. The amplification issue of this circuit is decided by R1 and Rin, which is equal to the damaging suggestions loop of the operational amplifier, and its static output voltage is decided by R1 and R2.

The benefit of this circuit is that it's easy in construction, has good accuracy, and may present steady static traits. The draw back is that the enter impedance is small and Vout has a restricted swing.

Application and Principle of Common Shunt Voltage Reference TL431

Determine (6) is an AC amplifier. This construction is similar to a DC amplifier and has the identical benefits and drawbacks. I’m attempting to make use of this amplifier as a substitute of a secondary op amp to amplify the output sign of a pyro IR sensor.

View extra : IGBT modules | LCD displays | Electronic Components