Atomizer core film shear force test and usage method
INDUSTRIAL LCD DISPLAYS / IGBT MODULES DISTRIBUTOR

Infineon / Mitsubishi / Fuji / Semikron / Eupec / IXYS

Atomizer core film shear force test and usage method

Posted Date: 2024-01-16

Instructions

1. Preparation

Before using the push-pull force testing machine, the following preparations need to be done:

(1) Check whether the power supply and wiring of the test machine are normal.

(2) Check whether the fixture is suitable for the sample to be tested and make adjustments.

(3) Select the appropriate sensor according to the requirements of the sample being tested.

2. Test operation

(1) Place the sample to be tested in the fixture and clamp it.

(2) Select the tensile or push test mode according to the requirements of the sample to be tested.

(3) Start the test machine and conduct testing.

(4) After the test is completed, record the test results, analyze and process them.

Precautions

1. When using the push-pull force testing machine, you need to pay attention to the following matters:

(1) The power supply and wiring of the testing machine must comply with safety standards.

(2) The fixture must be suitable for the sample being tested and adjusted.

(3) The sensor must be of appropriate model and calibrated.

(4) During the test, you need to pay attention to safety to avoid accidents.

2. During the testing process, you need to pay attention to the following matters:

(1) The operation of the testing machine must be stable to avoid vibration and noise.

(2) During the testing process, it is necessary to pay attention to the status of the sample being tested to avoid errors.

(3) The test results must be accurate and reliable to avoid misjudgment.

Electronic cigarette push and pull force testing machine

Technical advantages:

1. dgft intelligent digital technology: All test sensor modules adopt the company's unique intelligent digital technology (dgft), which greatly optimizes the test module's ability to adapt to various types of test environments and ensures that the same test module works on different hosts Reliable consistency of test data.

2. Auto-range technology: All test sensors of the equipment adopt automatic range design, with consistent resolution throughout the entire range (16bitplus ultra-high resolution). Customers do not need to make complicated and time-consuming gear settings on the software side before testing. .

3.vpm vertical positioning technology: All test sensor modules adopt the company's patented vertical displacement and positioning technology to ensure accurate and reliable testing status and precise and fast positioning actions.
The electronic cigarette push-pull force tester is a simple-to-operate device with a touch screen control function that can display various test parameters and curves at the same time, such as force/time, force/deformation and deformation/time curves. This testing machine is specially used for push and pull force testing of LED samples, circuit boards and other products, and special fixtures can be customized according to customer needs. The introduction of this equipment makes the push-pull force test of LED samples more convenient and efficient, and effectively evaluates the reliability and durability of the product.


#Atomizer #core #film #shear #force #test #usage #method